# Pictures, type and fills in the editor

Picture adjustments and masks, underline and strikethrough, pinned line ends, paragraph indents and lists, gradients and the focus handle, and how each design app carries them.

This page covers the finer controls in the web editor's inspector: how a picture sits in its frame and how its colour and mask are set, extra settings for text, and gradient fills. For the tools and drawing, see [Draw and shape in the editor](https://withmestra.com/docs/how-to/editor-tools/).

> **Before you start:**
>
> - You need the **Editor** or **Owner** role.
> - Open a master, or start a design. **Adjust**, **Mask**, **Flip**, underline and strikethrough, pinned line ends, indents and lists are master features. A size shows the result but doesn't offer the controls. See [Edit a size or master in the browser](https://withmestra.com/docs/how-to/edit-in-the-browser/).

## Pictures

Select a picture and the **Picture** section shows it.

- **Replace** or **Upload** swaps the picture. The chooser lists **Assets**, **In this run** and **Your pictures**.
- **Fit** says how it sits: "Fills the frame" or "Fits inside the frame".
- **Focus** is the point that stays in view when the frame is cropped. Drag the cross on the picture, or use **Focus across** and **Focus down**. **Centre** puts it back in the middle. The hint reads "Drag the cross on the picture to choose what stays in view."
- If the picture has fewer pixels than its frame, the editor warns "This picture has fewer pixels than its frame, so it may look soft."
- **Flip horizontal** and **Flip vertical** mirror a master's picture.

To move or zoom the picture inside its frame, double-click it or press **Enter**. Drag it or use the arrow keys (**Shift** for ten steps). Drag a corner, scroll, or press **+** and **-** to zoom. **Enter** keeps it; **Esc** puts it back.

### Adjust a picture's colour

**Adjust** has five sliders, **Exposure**, **Contrast**, **Saturation**, **Temperature** and **Tint**, each from -100 to 100. 0 changes nothing. The canvas follows the slider as you move it, and letting go saves it. **Reset** takes the whole adjustment off. Adjustments belong to the master's picture frame, so only a master shows them.

### Mask a picture

A mask is another picture that hides or shows parts of this one.

1. Select the picture and, under **Mask**, choose **Add a mask**. Choose a picture, or **Upload** one. A mask is a PNG, JPEG or SVG.
2. Under **Read the mask as**, choose **Alpha** (the picture shows where the mask is solid) or **Luminosity** (it shows where the mask is light).
3. Under **Keep the mask with**, choose **Frame** (the mask stays put when you pan or zoom the picture) or **Picture** (the mask moves with it).
4. **Replace** swaps the mask picture, and **Remove** takes the mask off.

A group can have a mask too. A group with a mask moves and scales as one piece when your sizes are made. Its members keep their places inside it and aren't laid out one by one. A group's mask has no choice of what it is kept with.

## Type

Select a text and the **Type** section shows its font, weight, text size, leading and tracking. These extra controls act on the paragraphs your caret or selection covers. With no caret, they act on every paragraph, as one undo step.

### Underline and strikethrough

Two buttons under **Underline and strikethrough**, marked U and S, toggle each on or off. With letters selected inside one paragraph, they act on those letters only, and the button's name ends "on the selected letters". A button shows pressed when everything it covers has the line, and pressing it takes it away. Over a mix, it puts the line on. The weight, offset and colour are the editor's own and aren't set here.

### Pinned line ends

A pin fixes where a line ends, whatever the box does.

1. In a master, put the caret where the line should end while you type.
2. Press **Shift+Enter**. The line ends there without adding a character. In a size, the same keys make a new paragraph.
3. To let go, select the text and choose **Release line breaks** under **Type**. The note beneath says how many line ends are fixed, for example "2 fixed line ends. They hold until the words of the paragraph change."

A text with pinned line breaks can't be turned. A paragraph set by a design app can have its line breaks, widths or letter positions fixed. The note then reads "Line breaks, widths or letter positions are fixed. They hold until the words of the paragraph change." Editing the paragraph's words releases them.

### Paragraph indents and lists

Each paragraph has **Indent**, which is how far every line starts from the left edge, and **First line indent**, extra inset for the first line. A negative first line indent hangs it out, which is what a list uses. Both are in the master's unit.

**List marker** offers **No marker**, **Bullet •**, **Numbered 1.** and **Your own…**. For your own, type the **Marker text**. Numbering counts the paragraphs it is set on, 1. 2. 3., as one undo step. Where the paragraphs disagree, the field shows **Mixed**, and the first paragraph's value in brackets.

## Fills and gradients

Under **Appearance**, **Fill** holds a stack of fills, the top one first. Choose **Add a fill** for **Solid**, **Linear gradient**, **Radial gradient**, **Angular gradient** or **Diamond gradient**. A picture fill isn't offered here: it comes with a picture you add.

Each fill has its own **Paint opacity** and **Paint blend**, can move up or down, and can be removed. A gradient also has:

- **Stops**: **Add a stop**, set each stop's position and colour, or drag the markers on the **Gradient stops** bar. The arrow keys move a marker by 1%.
- **Angle** for a linear gradient. **Centre X**, **Centre Y**, **Width** and **Height** for a radial one.

### Handles on the canvas

With a gradient selected, its handles appear on the artwork: **Gradient start** and **Gradient end** for a linear one, **Gradient centre**, **Gradient width** and **Gradient height** for a radial one, and the stops along the line. Drag one, or Tab to it and use the arrow keys (1% of the frame, 10% with **Shift**). Letting go saves it, and **Esc** puts the handle back before that.

### The focus handle

A radial gradient also has a **Gradient focus**: a small diamond over its centre. Drag it to move the focus off the centre, so the light seems to come from one side. "Drag to move the focus. Delete puts it back at the centre." **Delete** or a double click does that.

## How your design apps carry these

Each design app keeps some features as live design objects. Where it can't, it shows the result as a picture, so the design looks right. The editor marks it where it matters, with wording such as "Held natively in InDesign" or "Shown as a picture in Canva".

| Feature                            | InDesign           | Figma              | Canva              |
| ---------------------------------- | ------------------ | ------------------ | ------------------ |
| Flip                               | Kept               | Kept               | Kept               |
| Picture placement and focus        | Kept               | Kept               | Shown as a picture |
| Picture adjustments                | Shown as a picture | Kept               | Shown as a picture |
| Picture and group masks            | Shown as a picture | Shown as a picture | Shown as a picture |
| Underline and strikethrough        | Kept               | Shown as a picture | Kept               |
| Pinned line ends                   | Shown as a picture | Shown as a picture | Shown as a picture |
| Paragraph indents and list markers | Kept               | Kept               | Shown as a picture |
| Linear and radial gradients        | Kept               | Kept               | Shown as a picture |
| Angular and diamond gradients      | Shown as a picture | Kept               | Shown as a picture |
| Line ends (arrowheads)             | Kept               | Shown as a picture | Shown as a picture |

For tools, paths, turning and clipping, see [How your design apps carry these](https://withmestra.com/docs/how-to/editor-tools/#how-your-design-apps-carry-these).

## If something goes wrong

| You see                                                                                                          | What to do                                        |
| ---------------------------------------------------------------------------------------------------------------- | ------------------------------------------------- |
| "That adjustment isn't allowed. Each goes from -100 to 100."                                                     | Keep each slider between -100 and 100.            |
| "A mask has to be a PNG, JPEG or SVG picture."                                                                   | Choose or upload a picture in one of those forms. |
| "This picture has no mask yet. Choose a picture to mask it with."                                                | Choose **Add a mask**.                            |
| "This picture has no known place in its frame, so the mask can't be kept with it. Keep the mask with the frame." | Choose **Frame** under **Keep the mask with**.    |
| "The picture can be zoomed" a range of times                                                                     | Zoom within the range it names.                   |
| "That would move the picture out of its frame."                                                                  | Move the focus or the picture less.               |

## What's next

- [Draw and shape in the editor](https://withmestra.com/docs/how-to/editor-tools/)
- [Use the editor from the keyboard](https://withmestra.com/docs/how-to/editor-keyboard/)
- [Edit a size or master in the browser](https://withmestra.com/docs/how-to/edit-in-the-browser/)
