How-to guides
Draw and shape in the editor
The web editor has a rail of tools for drawing a master from a blank page. This page covers each tool, drawing and reshaping with the Pen, turning, grouping and clipping, the page, and the key for each. For opening a size or master to change it, see Edit a size or master in the browser. For pictures, type and fills, see Pictures, type and fills in the editor. To work without a mouse, see Use the editor from the keyboard.
The tools
Pick a tool from the Tools rail, or press its key. Each button’s title shows its key. Esc puts the tool down.
| Tool | Key | What it makes |
|---|---|---|
| Select | V | Nothing. It selects, moves and resizes what is there. |
| Text | T | A text. A click makes a one-line text; a drag makes a box. The word “Text” is selected, so you type over it. |
| Rectangle | R | A rectangle with square corners. |
| Ellipse | O | An ellipse. |
| Line | L | A straight line from where you press to where you let go. |
| Polygon | Y | A regular polygon, with six sides to start. |
| Star | S | A star, with five points to start. |
| Pen | P | A path you draw point by point. See Draw with the Pen. |
| Picture | I | A picture. You choose it from the picture chooser, or upload one. |
| Frame | F | A picture frame with an outline. The picture fills it and is clipped to the outline. |
| Logo | Shift+L | Your brand’s primary logo, in its own proportions, inside the safe area. |
| Button | B | A pill with a label on it, grouped. The label takes the Button role. |
How a tool places something:
- Drag on the page to draw the box. Hold Shift to keep the sides equal. A Line held with Shift snaps to steps of 45 degrees.
- Click to place the tool’s default size, centred where you clicked. The default is a share of the page’s shorter side, so a tall page and a wide page get the same-sized thing. It stays inside the page, or inside the safe area when the size has one.
- Press Enter on the artwork with a tool picked to place the default at the page’s centre. Each Enter after that steps the next one along.
- A Logo always goes inside the safe area.
Things to know about particular tools:
- A new Line is drawn in your brand’s first colour. Change it, and add arrowheads or other ends, under Stroke and Line ends in the Appearance section.
- For a Polygon or Star, change Sides, Points and Inner size under Appearance, then Shape. An outline that is neither a regular polygon nor a star shows “This outline isn’t a regular polygon or star, so it has no sides or points to change.” with Remake as polygon and Remake as star.
- While the Frame tool is picked, a Frame outline row offers Rectangle, Rounded rectangle, Ellipse, Polygon and Star. The next frame you draw has that outline.
- A Button’s label is coloured from your palette to read well on the pill.
- If a tool is refused, the editor says so and “Nothing was added.”
Position and align
Select an element to set its X, Y, Width and Height in the Position section. The nine-point Reference point says which part of the element the numbers describe. The align row has Align left, Align centre, Align right, Align top, Align middle and Align bottom, each to safe area, to the artwork or to the selection. Select three or more and Space evenly across and Space evenly down appear. A group selected whole is moved, aligned and spread as one thing.
If the brand holds an element to a range of sizes, the field says so, for example “The brand holds this between 80% and 120% of its size.”
Draw with the Pen
The Pen draws a path: straight segments, curves, open lines and closed shapes.
- Press P, or choose Pen.
- Click for a corner point. Press and drag for a smooth point; the handle follows the pointer, and the handle on the other side mirrors it.
- Hold Shift to hold a segment, or a handle, to steps of 45 degrees. Hold Alt while dragging to let one handle go alone and make a sharp turn.
- To close the path, click the first point. Dragging from the first point pulls its handles, for a smooth close.
- To leave a path open, select Done, or press Shift+Enter or Esc. Cancel drops it.
A path needs at least two points to stay open, or three to close. A path drawn wholly off the page is refused: “The path is wholly off the page. Draw at least part of it on the page.” Part of it may run off the page.
A new path with no fill is drawn as a line in your brand’s first colour. Give it a fill and a stroke in Appearance.
Draw with the keyboard
You don’t need a pointer. With the Pen picked:
- The arrow keys move a cursor. Shift moves it ten steps.
- Enter puts a corner point on the cursor. With no cursor move yet it goes at the page’s centre.
- Enter on the first point of a path of three or more points closes it.
- Backspace takes the last point back.
- Shift+Enter finishes an open path of two points or more. Esc does the same, clears a path of fewer points, or puts the tool down if there are none.
A screen reader hears each point (“Point 3 at 210, 101”), “Path closed” and “Path added”.
Edit a path’s points
Select a path and choose Edit points, or press Enter. A rectangle, ellipse, line, polygon or star shows Edit shape instead. See Edit shape below.
- Click a point to select it. Shift-click adds or removes points from the selection, and a drag across empty paper selects the points inside it.
- Drag a point to move it, or drag its handles to reshape the curve. Shift holds a handle to 45 degree steps. Alt breaks a smooth pair so the two handles move alone.
- Click on the outline between points to add a point there. The curve doesn’t change. Drag at the same time to place it.
- Use the buttons over the stage: Delete, Corner or Smooth, Open or Close, and Done. Double-click a point to switch it between corner and smooth.
A closed path needs at least three points and an open one two. Delete that would leave too few does nothing. A picture frame’s outline stays closed, so Open is off for it.
From the keyboard:
- Tab goes to the next point, Shift+Tab back. Cmd or Ctrl+A selects every point.
- The arrow keys move the selected points; Shift moves them ten steps.
- H takes the point’s handles in turn, so the arrows move a handle.
- +, = or Insert adds a point after the selected one. S smooths or sharpens it. O opens or closes the path.
- Delete or Backspace removes the selected points.
- Enter finishes. Esc puts back a drag, then finishes.
Edit shape
Edit shape turns a rectangle, ellipse, line, polygon or star into a path with the outline it has, so you can move its points. A rounded rectangle’s corners become curves, and an ellipse becomes four points. The fill, stroke, look and a picture frame’s picture stay as they were.
Some shapes have no plain outline to turn into, so Edit shape is refused: “That shape can’t be turned into a path without changing how it looks: a bevelled, inset or fancy corner, an arc or ring, or a stroke of a different weight on each side has no plain outline.” Remove the bevel, arc or uneven stroke first.
Turn and flip
Select an element and drag the Turn handle above it. Shift snaps the angle to steps of 15 degrees. Or type in the Angle field in Position. Angles run counter-clockwise, so a positive angle turns the element to the left. The field shows the allowed range if you go past it.
- A group has no angle of its own. Its field reads Turn by, and turns every member by what you type.
- A button turns as one piece, pill and label together.
- Only a text, a shape, a picture or a vector can be turned.
- Some things can’t be turned, and the editor says why: a photo (“Give it another role to turn it”), the background, a picture drawn from a design app, something that moves as one with what it sits with, a text with pinned line breaks, and a group that has its own fade, look, or another group inside it that isn’t a clip.
Flip horizontal and Flip vertical are in the Picture section, under Flip. A master’s picture can be mirrored; a size’s can’t, and a logo isn’t offered it.
Group and clip
Group (Cmd or Ctrl+G) ties the selection together. Ungroup (Shift+Cmd or Ctrl+G) undoes it. Bring forward, Send backward, Bring to front and Send to back change the stacking order; Cmd or Ctrl+] and Cmd or Ctrl+[ do the first two, and Alt with them goes all the way. Layers shows each group as “Group of N”.
A clip crops things to a shape.
- Select the shape and what it should clip: two or more things.
- Choose Clip to shape, or press Alt+Cmd or Ctrl+M.
- The shape becomes the frame. It shows in Layers as a “Clip group of N”, with a Frame row.
- To undo it, select the clip group and choose Release clip, or press Shift+Alt+Cmd or Ctrl+M.
The frame has to be a closed shape: a rectangle with plain corners, an ellipse, a polygon or star, a closed path from the Pen, or a picture frame. Text, lines, open paths and cut or inset corners can’t be one: “A clip needs a closed shape for its frame”. So draw a closed path with the Pen and use it as a clip, or use Edit shape and reshape a rectangle first.
If Clip to shape is greyed out, hover it to read why. Typical reasons: you selected only one thing, one of them is in a group already, none is a closed shape, or one is the background. Ungroup is off for a clip group; release the clip first.
A picture can also be placed straight into a shape. Select the shape and choose Place picture…, or drop a picture file on it. The picture fills the shape and is clipped to its outline.
Set the page size and margins
Select nothing, in a master, and the inspector shows Page: Page width, Page height and the four margins, in the master’s unit (px or mm). Change one field and press Enter or leave it. Each field is its own undo step.
- Changing the page doesn’t move or scale anything on it.
- A page can be only so big or small on a side. The editor says the range if you go outside it.
- A margin has to be between 0 and a limit it shows. The margins can’t leave no page: “Left and right must add up to less than the width, and top and bottom to less than the height.”
Hide and delete
In a master, Delete removes the selected element. In a size, use Hide instead: press Shift+Cmd or Ctrl+H, or use the hide button on the layer in Layers. With nothing selected, the same keys bring back what you hid.
How your design apps carry these
When you save a master back to a design app, each app keeps some things as live design objects and shows others as a picture, so the design still looks right. Here is how the features on this page fare.
| Feature | InDesign | Figma | Canva |
|---|---|---|---|
| Pen paths: open lines and curves | Kept | Kept | Kept |
| Paths made of several shapes, and fill rules | Kept | Kept | Shown as a picture |
| Turning | Kept | Kept | Kept |
| Clip to shape | Kept | Kept | Shown as a picture |
| A clip’s own stroke | Shown as a picture | Kept | Shown as a picture |
For pictures, type and fills, see How your design apps carry these.
If something goes wrong
| You see | What to do |
|---|---|
| “The path is wholly off the page.” | Draw at least part of the path on the page. |
| “The path was not kept: new shapes can’t be added just now.” | Try again in a moment. |
| “That can’t be turned.” or a reason | Read the reason. See Turn and flip. |
| “That can’t be made a clip. Try again.” | Select the shape and the things to clip again. |
| “That shape can’t be turned into a path without changing how it looks…” | Remove the bevelled corners, arc or uneven stroke, then choose Edit shape. |