How-to guides
Set up with the assistant
The setup assistant drafts your brands, logos, formats and a first campaign. You review the draft and confirm it. Nothing is saved until you do.
Start it
There are three ways in:
- Home. On a new organisation, the Get started card opens with How would you like to set up? and two links, I’ll do it myself and Set it up for me. The card shows to editors and owners until your organisation has a run outside the sample brand.
- Brands. Open Setup > Brands and select Add a brand or client.
- Continue setup. If you have a setup open, Home shows a Continue setup card with Pick up where you left off. Select Continue.
You never have to use it. Home, Brands, Formats and Campaigns all work without it.
Choose how to set up
The page How would you like to set up? has two cards:
- I’ll do it myself. “Use the setup forms, with bulk tools for spreadsheets and logos.” It links to Add a brand, Add formats and New campaign. Use the bulk tools opens the review screen with the spreadsheet and logo drop zones.
- Set it up for me. “Tell us what you have. We draft your setup and ask about anything missing.”
Both choices write the same things: brands, logos, formats and one campaign. You can switch at any time. On the review screen, select Get help with this setup (from do it myself) or Do it myself instead (from set it up for me). Mestra saves your edits first.
Tell Mestra what you have
If you chose Set it up for me, you make two choices.
- Under What kind of business is this?, choose one: Shopping centres, Franchise or retail network, Agency, Brand, Screen network or Other. You must choose one before Continue turns on. Your choice sets which format packs are ticked for you later.
- Under What do you have?, tick anything that applies: Brand guidelines, Screen or format specs, A list of locations, Logos, Past artwork. Or tick None of these yet. Ticking None of these yet clears the others, and ticking any other clears it.
- Select Continue.
What Mestra reads today
The assistant reads a locations spreadsheet, logo files, screen or format spec sheets, and brand guidelines. It doesn’t read past artwork yet: that shows Coming soon. You can still tick it. If you do, you see “We’ll start from suggested settings for the ones marked Coming soon.” You change those settings on the review screen.
Spec sheets and brand guidelines are read only when you choose Set it up for me, not from I’ll do it myself.
Review your setup
The Review your setup screen is a draft. Work down the cards.
Your files. Drop in your files. Only the drop zones that match what you ticked show when you chose Set it up for me.
- Locations: CSV or Excel, 25 MB at most. Accepted types are .csv, .txt, .tsv and .xlsx. Mestra reads the first 5,000 rows and 50 columns.
- Logos: PNG, SVG or a zip of them. Each logo must be 2 MB or smaller and no more than 4096 px on a side.
- Spec sheets: PDF, Excel (.xlsx), CSV, PNG or JPEG, 25 MB at most. A PDF can have up to 100 pages. Spreadsheets are read to the first 5,000 rows and 50 columns.
- Brand guidelines: PDF only, 25 MB at most and up to 100 pages.
- A setup holds 10 files and 5,000 brands. Select Remove to take a file out.
If Mestra isn’t sure which spreadsheet column holds the names, the file shows Names, Codes and Addresses pickers. Choose the columns, then select Use these columns. Codes and Addresses can be None. Where a code is missing, Mestra makes one from the name.
Mestra matches logos to brands by file name, and works out Primary or Reversed from the name and the logo’s brightness. If it can’t tell, it asks.
Spec sheets
Each spec sheet is read in the background. It shows Reading while Mestra reads it. When it’s done, its formats appear in the Formats card. If a read fails, the file shows Couldn’t read with Try again.
On a long PDF, Mestra finds the pages that hold the specs and reads up to 20 of them. Pages are read as pages, so scanned pages and photos of a spec table work too.
For each format it finds, Mestra fills in what the sheet states:
- the name;
- the width and height, in the unit the sheet uses (px, mm, cm, m, in or pt). Mestra never converts units;
- the resolution (dpi);
- the bleed;
- the safe area or margins, including per side or as a percentage of the side;
- what the format must include, such as a QR code or a call to action;
- the kind of format: digital out of home, in-centre screen, print, social or web;
- the smallest type size for legal and body text.
Each value shows where it came from: the file and page, or the row, with a short quote, so you can check it against the sheet.
Mestra asks a question when:
- two places give different sizes for the same format (“Which size is right?”);
- it isn’t sure of a value, such as a size, resolution, bleed, safe area, kind, what the format must include or the smallest type (“Is it …?”);
- a value it read can’t be used, such as a size, bleed or safe area that’s impossible or too large for the page.
Mestra doesn’t follow instructions written inside a spec sheet.
It can’t read:
- password-protected PDFs, PDFs over 100 pages, or files over 25 MB;
- tabs after the first in an Excel workbook (only the first tab is read);
- cell comments in a spreadsheet.
It leaves out video-only details such as durations, frame rates and file sizes.
Brand guidelines
Brand guidelines are read in the background, like spec sheets: the file shows Reading, then its rules appear on the brands it covers. On a long PDF, Mestra finds the pages about colour, type, the logo and layout, and reads up to 20 of them.
Mestra fills in what the guidelines state:
- the brand colours, primary first (up to 8). Hex and RGB values are used as given, and CMYK values are kept as the colour’s exact CMYK. A colour given only as CMYK gets a hex value worked out from it, marked “worked out from CMYK — check it”;
- the names of the fonts you may use, main one first (up to 6). Names only: Mestra never takes font files out of the PDF;
- the logo’s smallest width, as a share of the layout’s width, and its clear space, as a share of the logo’s width;
- the smallest gap between elements, as a share of the safe area’s height;
- how many lines a headline may run to;
- brand rules that fit none of the fields above, as suggested Notes.
Each rule shows the file, page and a short quote it came from, under its field in Brand rules. Suggested notes sit under the Notes box, each with its page and quote. When you confirm, they are added to the notes line by line. Mestra skips ones already there and never replaces what you wrote.
The guidelines apply to the brand they name. If they name none of your brands, they apply to all of them, and Mestra asks “Which brands should use them?”. For a brand already in your organisation, Update it changes only the rules the guidelines give and leaves the rest as they are.
Mestra asks a question when:
- a colour is given only as Pantone (“What is it as a hex colour?”);
- a logo size is given in millimetres or pixels, or the clear space by a letter’s height, rather than as a share;
- a value can’t be used, or it isn’t sure of one;
- two sets of guidelines give different values for the same brand;
- it wants you to check the font names are the ones in your design apps.
Mestra doesn’t take logos out of the guidelines. If you haven’t uploaded logo files, it reminds you to. It doesn’t follow instructions written inside the guidelines.
Questions. Mestra lists what it needs to know, required ones first. A Needed chip means the question blocks Confirm setup. For each question you can:
- select Use “{suggestion}” to take its suggestion;
- type a value in Your answer and select Answer;
- select Ask, say it in your own words in the Say it in your own words box (500 characters at most), and select Send.
Ask is only offered when you chose Set it up for me. If you see “Reading has stopped for this setup. Finish the rest by hand, or contact us.”, Ask and file reading have stopped for this setup. Answer the remaining questions by typing.
Brands. One block per brand. A new brand offers Add it or Skip it. A brand already in your organisation offers Update it or Skip it. You can edit Name, Code, Brand colours and Brand rules. Each value shows where it came from: your file, “Suggested”, “Your answer” or “Already in your organisation”. If you give no brand rules or colours, the brand takes the sample brand’s rules and colours, marked “Suggested”.
Logos. If logos were read, choose each logo’s Brand and Variant (Primary or Reversed).
Formats. The Format packs you’re offered depend on your business type. Each format shows its size, with a choice to add, update or skip it. Ones your organisation already has show “Already in your organisation”. Formats read from your spec sheets show the file and page or row they came from.
Campaign. A first campaign called “First campaign”, with a Format set to choose. It’s separate from the sample campaign.
At the bottom, select Save changes when you’ve edited something. The bar tells you where you are: “Unsaved changes”, “Answer 1 question first”, “Answer {n} questions first” or “Ready to confirm”.
Confirm
Select Confirm setup. It turns on once your changes are saved and no required question is open. Questions on items you skipped don’t count.
Until you confirm, nothing is saved to your organisation. When you confirm, Mestra checks everything, then saves your brands, logos, formats and campaign together. Either all of it is saved or none of it is.
You land on Home. A Run your first campaign card says “Your setup is saved. Open your design app and run your first campaign.” Select Open the apps. The card shows for 30 days, until your organisation has a run outside the sample brand.
If your guidelines named fonts that aren’t included with Mestra and that you haven’t uploaded, Home also shows Add your brand’s fonts, listing them by brand with a link to each brand’s fonts. Only upload fonts your licence lets a service like Mestra use.
Setting up is included: confirming, starting, uploading and answering cost nothing extra, and the assistant doesn’t count towards your trial’s sizes.
Come back later
You can have one open setup per organisation. Opening Add a brand or client while you hold one takes you straight back into it.
A setup is kept for 7 days from your last change. After that it closes and your uploaded files are deleted. An expired setup says “This setup has expired. Start again.”
If a colleague has the setup open, you see “Setup in progress by {name}” with Take over.
To stop, select Cancel setup, then Cancel setup again in the Cancel this setup? box. “Your files are deleted and nothing is saved.” Select Keep going to stay.
You can start 3 new setups per organisation each day.
For agencies
Select Add a brand or client on the Brands page each time you take on a client. Each setup is one client at a time, with its own spreadsheet, logos, spec sheets and brand guidelines. Each new brand is added to your Studio subscription, pro rata.
If something goes wrong
| You see | What it means | What to do |
|---|---|---|
| “Ask an editor or owner to set up your organisation.” | You’re a reviewer. | Ask an editor or owner. |
| “Your trial includes 1 brand. Subscribe on the Billing page to add more.” | Confirm setup was refused because the new brands go over the free trial’s limit. | Skip a brand, or an owner subscribes. See Plans and billing. |
| Confirm setup is refused after your trial ended | Your organisation can’t save changes. | An owner subscribes on Billing. See Your free trial. |
| “You’ve started 3 setups today. Try again tomorrow, or continue the last one.” | Daily limit reached. | Continue your open setup, or wait until tomorrow. |
| “We couldn’t read {file}. Upload another version, or enter these by hand.” | The file isn’t readable. | Save it again (a spreadsheet as CSV or Excel) and upload it. |
| “Files can be 25 MB at most.” | A file is too big. | Split or shrink it. |
| A spec sheet shows Couldn’t read with Try again | Reading it failed. | Select Try again. |
| “We couldn’t read {file}. Upload a smaller PDF, or enter these by hand.” | The PDF is too heavy to read. | Upload a smaller PDF, or enter the formats by hand. |
| “Someone else changed this setup. Reload to see their changes.” | A colleague edited it. | Reload, then redo your change. |
| “Every format in {set} is skipped. Keep at least one format in it, or skip the set.” | A format set has nothing in it. | Keep a format, or skip the set. |
| “Choose at least one brand for this campaign, or skip the campaign.” | The campaign has no brand. | Keep a brand, or skip the campaign. |
What’s next
- Run a campaign once your setup is saved.
- Set up a brand by hand, or to change a brand later.
- Brands explains what a brand holds.