Skip to content

Mestra Player

Screen groups and video walls

A video wall is several displays that together show one picture. Mestra Player can drive one in two ways. This page helps you pick one and set it up.

One PC or one PC per screen

One PC for the whole wall (the displays are joined in the graphics driver and Mestra sees one big display):

  • One picture across the whole wall, with nothing to keep in step: it is a single player.
  • One point of failure: if the PC stops, the whole wall is dark.
  • Limited by the PC’s graphics card: it has a fixed number of outputs, and the video it can play has a size limit (see Very wide video).

One PC per screen (a screen group in Mestra):

  • Any number of screens, and one PC can fail without the others stopping. A screen that is off the air shows as such on the group’s page.
  • Each PC plays its own part of the picture. Mestra keeps them in step and shows how well on the group’s page.
  • Needs a PC for each screen.

If the wall is a handful of displays on one graphics card and one picture matters more than resilience, use one PC. If you need resilience, or more screens than a card has outputs, use one PC per screen.

A screen group

A group is one screen in Mestra, made of several member screens, each with its own PC. You book once on the group. Each member crops its own part of the picture.

Make a group

An owner makes a group in the player web app. On Screens, open the ⋯ menu and choose New group, then fill in:

  • Name, for example “Entrance wall”;
  • the screens that make the group, picked in the order they are first numbered;
  • Rows and Columns. Rows times columns must match the number of screens picked;
  • Gap between pictures, mm and Screen size, inches (both optional). With neither, there is no gap in the picture;
  • Time zone, normally the first screen’s.

Select Make group. The group’s page opens, ready to place the screens.

The screens you pick must be:

  • named, and not in a group already;
  • at one site, with the same pixel size;
  • without bookings of their own.

Screens already in a group are not offered; Mestra checks the rest when you select Make group and says what to fix. You can also make a group through the API (POST /api/v1/player/groups, an owner’s key with Screens · Write). See the API reference.

Place the screens

A new group starts in a placing step. Each screen shows a big number. On the group’s page select Place screens, and tap the screen on The wall, as you face it where you see 1, then 2, and so on. Select Save places. The numbers go away when you save or after 30 minutes. Place screens again redoes it, and an editor can place screens too.

Group settings

On the group’s page, Group settings lets an owner change the Name, the Screen size (inches, diagonal) and the Gap between pictures (mm), and choose When stopped, show. The size and gap draw the wall to scale and decide the gap left in the picture. The group’s hours and stop picture are its own.

To change who is in the group, select Add a screen, or Remove next to a member. To remove the group, use Remove the group in its ⋯ menu. Its screens stay and can join another group. A group with bookings can’t be removed: end them first.

Stills and video

A group plays stills and video. Video plays up to 30 fps for now. A video above that can’t go to a group, and Mestra says “Screen groups play video up to 30 fps for now.”

A video bigger than one member can decode is split into one file per screen. On the publish dialog, choose Have Mestra split it, or Upload one file per screen. Mestra re-encodes your video into a Screen files set, marked Re-encoded by Mestra, and your uploaded video stays exactly as it is. The files must all have the same frame rate and the same length.

Windows on group members

A member can play in a window of its PC’s output instead of the full display, and a window can be turned. Set it on the member’s panel profile. See Windows and frames.

  • A member’s size is its turned window, and every member must have the same turned size.
  • A window that changes a member’s size is refused. If every member follows the same profile, changing that profile’s window resizes the whole group together, as long as the group’s bookings still fit.
  • A screen in a group can’t have frames.

Staying in step

Each member measures its clock against Mestra’s. For video, members start together and hold to a shared timeline. For stills, they change on the same instant. The group’s page shows each member as In step, Out of step, Placing, or Sync: no report yet. Take screenshots of all (an owner) shows what every member is showing.

Plays from a member record whether it was in step. See Proof of play.

Joining the displays on one PC

Do this in the graphics driver, before you set up Mestra. Windows must see one display as wide as the whole wall.

NVIDIA (Mosaic)

  1. Open the NVIDIA Control Panel and choose Configure Surround, PhysX (Mosaic on workstation cards).
  2. Pick Span displays with Surround (Mosaic).
  3. Choose the displays and the grid (for example 4 across by 1 down), and the refresh rate every display supports.
  4. If the displays have bezels, use the bezel correction here, in the driver, and not anywhere else. Mestra draws the picture at the size the driver reports.
  5. Apply, and confirm.

AMD (Eyefinity)

  1. Open AMD Software and choose Display, then Eyefinity.
  2. Create an Eyefinity display from the displays you want, and choose the grid.
  3. Use the bezel (position) setting in the driver if the displays have bezels.
  4. Apply, and confirm.

Names and menus change between driver versions. Follow the driver’s own help if a step looks different.

Check the size

Open the screen’s page in Mestra. It shows the size the PC reports, for example 7680 × 2160. It should be the size of the whole wall in pixels. If it shows one display’s size, the span did not take.

If the size later drops, for example after a driver update broke the span, the page says “The display size changed from 7680 × 2160 to 1920 × 1080”, and the screen shows “Out of date” until the picture is made again at the new size. Join the displays again in the driver.

“Not spanned”

Mestra shows “Not spanned: this PC has 4 displays and Mestra shows on one” when the PC has more than one display and Windows is not joining them into one. Mestra shows on one of them only; the others stay dark or show a copy.

Fix it by spanning them in the graphics driver (above). If you meant one PC per screen, give each display its own PC instead.

Mestra’s self-healing never changes the display mode on a spanned PC, because that can break the span.

Very wide video

A wall of 7680 pixels or more wide is more than many graphics cards can decode as one video. A video that is too big for the card plays badly or not at all. Each screen’s page lists the largest video it can play, from what the player measured on that PC (the media decode report). Keep the wall’s video within it, or use one PC per screen and let each play its part.